How much do you know about the purchasing skills of cabinet pulleys?

When choosing cupboard, the pulley of cupboard is also very important, so how to choose and buy cabinet pulley? Today, let's tell you how to choose and buy cupboard pulley.
Skill 1. Bearing capacity
The quality of slide rail directly affects the load-bearing capacity of drawer. You can test the load-bearing capacity of the drawer by the following methods: pull the drawer out completely, press the outer edge of the front of the drawer by hand, and observe the front tilt of the drawer from the side. The smaller the front drawer, the stronger the load-bearing capacity.

Skill 2. Pay attention to the structure and material of drawer slide
The most important thing to choose and buy cabinet drawer slide is good load-bearing. The drawer slide rail connected with the whole is the best, followed by three-point connection, and has the characteristics of simple disassembly. For drawer slide, poor material has a fatal impact on the quality of the slide. When purchasing, you should carefully feel the slide of different materials with your hand, and choose the slide with real feeling, high hardness and heavy weight.

Skill 3. Drawer material
The steel drawer is dark silver gray from the outside, with delicate texture. Compared with the aluminum drawer, the steel drawer side plate thickness is larger. The color of powder spraying steel drawer is lighter than that of steel drawer, which is light silver gray, and its thickness is thinner than steel drawer, but thicker than aluminum drawer.
Skill 4. Select drawer slide rail in field test
Good cabinet drawer slide has little resistance when pushing and pulling, and when the slide is pulled to the end, the drawer will not fall off or overturn. On site, you can also pull out the drawer and press it on the drawer with your hand to see if the drawer is loose and clanging. At the same time, the resistance and resilience of the drawer slide in the process of pulling out the drawer, and whether it is smooth or not, also need you to push and pull several times on site, and then judge after observation.